China Machines/Suppliers. EPE Foam Sheet Recycling Machine

• Type: EPE Foam Machine
• Raw Material: LDPE
• Principle: Extruder
• Automation: Automatic
• Computerized: Computerized
• Certification: CE, ISO9001:2008, GMP
• Model NO.: JC-EPE-HS200
• Screw Dia: 200mm
• Output: 250-300kg/H
• Installed Power: 62kw
• Dimension: 8X1.2X1.5m
• Transport Package: Packing by Film
• Specification: 1 set
• Trademark: JC
• Origin: China
• HS Code: 8477209000
• Production Capacity: 50sets/Month

Product Description

China machines/suppliers.EPE Foam Sheet Recycling Machine


Description

Model: JC-200 (output: 250-300kg/h)

I. Major Parts              
Steel rack structure                 1 set
Crush unit                      1 set
Squeezing unit                 1 set
Auto control unit                1 set
Mold head                      1 set
Cooling machine               1 set



II. Major Design Data
Diameter of screw: 200mm
The major axis rate of screw: 18:1 (L/D)
Structure of screw: the cone in difference diameter, deepening, and pegging type.
Screw rotate speed (r. p. m): 70
Capacity: 250-300kg/hr
The power of main electric machine: 45KW
Total power of heating machine: 12KW
Power of pelletizing knife electric machine: 3KW
Total capacity of electric: 65KW
Water sink: 0.45m×3.6m
Used material: EPE leftover material LDPE
Capacity of squeezing engine: about 300-350kg/hr         
Hauling speed: 300-400r/min
Specification of power: three phases 380×50/60HZ



III. Demand of Public Project
Electric power: about 70KW
Cooling water: 6M³/H
Pelletizing machine power: 3KW
Installation size: approx: 8000×600×1200mm
IV. Specification of Each Part
A. Steel rack structure: 1set, 240×600mm
B. Squeezing 1 set
a) Deceleration box 200-12.5:1
--Model: helical gear without pole
--Material: forgeable iron
--Box body: FC20
-- Gear wheel: (special polishing and heating)
-- Motor 15KW AC
Electromagnetism timing 0 to 1500 turns/min
b) Spiral tube and stick
- Diameter: ¢200mm
- Material: alloy steel, nitrogen
- Heating area: 4 set
- Heating method: aluminum heater & belt heater
C. Mould specification: 300×450mm
             Heating area: 1 zone
D. Water cooling groove specification: 600×2400×400mm
E. Pelletizing part: 3KW electromagnetism timing



V. Spare Parts List
Heating panel                         2 pcs
Thermocouple                        2 pieces
Heating machine                   1 set
Die head heating loop            1 piece
Tool box                                 1 set
Hexagonal socket                   1 set
Flexible wrench                      1 set
Fixed wrench                         1 set

Main Models

The  waste scrap of EPE foam sheet/film/board can recycle and use again.
The scrap can directly crush and recycled,no need any other accessory machine.
 

Model		JC-EPE-HS240	JC-EPE-HS200
Screw dia.	mm	240	200
Output	kg/h	100-160	250-300
Installed power	KW	50	62
Dimensions	m	8×0.6×1.2	8×1.2×1.5

Contact